Kit d'embrayage Dalton pour Arctic Cat 650/700 Prowler XT (2006)

For 650/700 Prowler XT Utility Vehicle ('06 only, oversized tires)

For use only on the '06 model with older (compression spring) secondary clutch.

For '07 & newer Prowler models (with new torsion style secondary clutch) use part # DA650-HC for large tires and high altitude applications.

The Prowler XT side by side utility vehicle was designed for a very wide variety of uses. The stock tires are 26" radials, but a very light weight style of tire, and and the fronts are still 8" wide like many of the common 25" tires on ATV's. Our testing showed that given the intended use, the stock clutching was calibrated fairly well for the stock tires.

The addition of oversized tires definitely hurt the performance of the Prowler. It is well-known that vehicles with oversized tires can never be as quick as ones with lighter/smaller stock tires. Many, however, need the better mud performance and ground clearance offered by aggressive big wheel kits. The use of this cost effective new roller kit helps restore some of that lost rpm and performance. Helps with high altitude operation.

Note: For use with oversize tires. If using with stock tires at low elevations (0-3000') it may cause slight loss of top speed. This kit can be used for stock or oversized tires above 3000' elevation.