Depuis 2008
Prix bas garanti
Retour facile
Expédition rapide
Détails du produit
Take your performance to new heights with a Carburetor Jet Kit for your ATV/UTV. Increase power and improve performance throughout the entire RPM range, while improving throttle response and smoothness. These Carburetor Jet Kits take the guesswork out of tuning your ATV/UTV.
Whether you’re rolling with a stock ATV/UTV or you’ve made some modifications, our Jet Kit will optimize your air/fuel ratio to eliminate rough spots and help you take control of your vehicle’s power. You can go with a Stage 1 Jet Kit to give your stock engine a 5% boost of horsepower or send it all the way up to Stage 3, to get the most of the modifications you’ve made to your ATV/UTV.
Features
- Kit includes jets, fuel needle, adjusting washer, e-clips and instructions
- 5-8% power range
- Fully adjustable
- Increases power and drivability
- For carbureted vehicles only
STAGE 1
- Perfect for ATVs with a stock engine using the stock airbox, air filter, and pipes. Stage 1 Jet Kits are engineered to improve throttle response and deliver approximately 5% more horsepower than stock. These kits are fully adjustable to allow the use of well-designed aftermarket pipes and stock replacement air filters.
STAGE 2
- If you’ve made slight modifications to your ATV, but still crave more performance, a Stage 2 Jet Kit is the solution. With a Stage 2 Jet Kit, you could see power gains of approximately 8%. This kit is intended for ATVs with stock or mildly tuned engines using a well - designed aftermarket pipe with a modified airbox and a stock replacement air filter.
STAGE 3
- Get the most out of your modifications with a Stage 3 Jet Kit, which can increase power by 10 to 15%. Stage 3 Jet Kits are designed for ATVs with a stock or mildly tuned engine using individual air filters instead of an airbox.
STAGE 7 (Race Only - high rpm, not for street use)
- Made for the speedway, not the highway. If your ATV is set up for racing, reach your maximum potential with a Stage 7 Jet Kit. Stage 7 kits are designed to optimize performance for your tuning specification or racing conditions.
- This kit is intended for closed course competition only. This kit will improve top-end power and throttle response, but may compromise low-end drive-ability.
TESTED TO PERFECTION
Dynojet’s jet kits are designed to upgrade every part of your carburetors air/fuel ratio with included step-by-step instructions for whatever you need upgraded. From your fuel needle to the main air jet, Dynojet has extensively tested every component, which means that you’ll see results as soon as you rev the engine.
SMOOTHER POWER
These jet kits give some extreme upgrades in a small package. They increase power and smoothness throughout the entire rev range while maintaining fuel economy. There are multiple kit options from stock commuter motorcycles to race-ready bikes and everything in between.
Take your performance to new heights with a Carburetor Jet Kit for your ATV/UTV. Increase power and improve performance throughout the entire RPM range, while improving throttle response and smoothness. These Carburetor Jet Kits take the guesswork out of tuning your ATV/UTV.
Whether you’re rolling with a stock ATV/UTV or you’ve made some modifications, our Jet Kit will optimize your air/fuel ratio to eliminate rough spots and help you take control of your vehicle’s power. You can go with a Stage 1 Jet Kit to give your stock engine a 5% boost of horsepower or send it all the way up to Stage 3, to get the most of the modifications you’ve made to your ATV/UTV.
Features
- Kit includes jets, fuel needle, adjusting washer, e-clips and instructions
- 5-8% power range
- Fully adjustable
- Increases power and drivability
- For carbureted vehicles only
STAGE 1
- Perfect for ATVs with a stock engine using the stock airbox, air filter, and pipes. Stage 1 Jet Kits are engineered to improve throttle response and deliver approximately 5% more horsepower than stock. These kits are fully adjustable to allow the use of well-designed aftermarket pipes and stock replacement air filters.
STAGE 2
- If you’ve made slight modifications to your ATV, but still crave more performance, a Stage 2 Jet Kit is the solution. With a Stage 2 Jet Kit, you could see power gains of approximately 8%. This kit is intended for ATVs with stock or mildly tuned engines using a well - designed aftermarket pipe with a modified airbox and a stock replacement air filter.
STAGE 3
- Get the most out of your modifications with a Stage 3 Jet Kit, which can increase power by 10 to 15%. Stage 3 Jet Kits are designed for ATVs with a stock or mildly tuned engine using individual air filters instead of an airbox.
STAGE 7 (Race Only - high rpm, not for street use)
- Made for the speedway, not the highway. If your ATV is set up for racing, reach your maximum potential with a Stage 7 Jet Kit. Stage 7 kits are designed to optimize performance for your tuning specification or racing conditions.
- This kit is intended for closed course competition only. This kit will improve top-end power and throttle response, but may compromise low-end drive-ability.
TESTED TO PERFECTION
Dynojet’s jet kits are designed to upgrade every part of your carburetors air/fuel ratio with included step-by-step instructions for whatever you need upgraded. From your fuel needle to the main air jet, Dynojet has extensively tested every component, which means that you’ll see results as soon as you rev the engine.
SMOOTHER POWER
These jet kits give some extreme upgrades in a small package. They increase power and smoothness throughout the entire rev range while maintaining fuel economy. There are multiple kit options from stock commuter motorcycles to race-ready bikes and everything in between.
