Disque de frein de moto à contour avant EBC XC-Series

Features:

• The steel used in the EBC rotor blades is a special stainless blend with higher friction effect than normal heat treated stainless steel found on stock discs
• Boasts up to 10% improvement in friction effect improving brakes even further
• Weight of the X and XC series is reduced by 5-10% by using a 6 only button drive system on a lightweight alloy centre hub which once again grabs the lead over stock parts
• The SD-System uses a square sided rivet with many advantages
• The SD-System of square sided buttons means that the rotor can expand inwards and outwards unrestrained and that perfect rotor functionality is retained at any speed or load
• This extends the lifetime of the rotor and prevents distortion failures
• Keeps the rotor blades perfectly true and flat throughout their life cycle and technically the only reason for a rotor to need replacement will be impact damage or over a very extended number of miles possible rotor wear limits being exceeded
• This means that a rotor equipped with the EBC Brakes SD-System could last 5-10 times as long as a conventional rotor built with circular buttons
• The drive forces under braking are transmitted over a line contact on the square side of the button compared to the point contact of a circular button
• Actual Product may vary from web image