Depuis 2008
Prix bas garanti
Retour facile
Expédition rapide
Détails du produit
Fitment Notes:
- Driver applications require model-specific Splined Adapters (sold separately)
- Passenger applications for Harley-Davidson Softail & Dyna require Anti-Rotation Mounts. Installation on other models in place of a male mount footpeg require Splined Adapters (Part # 8883)
- Passenger applications utilizing Part # 7916 requires 1" clearance from bottom of footpeg mount and exhaust. Sits 1" farther out than stock.
- Part # 4455 bracket design elevates board above existing peg locations about 1-1/4".
- Boards should not be installed in place of a footpeg on a peg mount secured with a single fastener and no anti-rotation mechanism. The board will apply too much force and loosen the mount from the bike.
- Verify operation of existing shift lever and brake pedal will not be adversely affected by installation.
Install footboards in place of a footpeg! These kits include our finely chromed ISO-Boards and a cast bracket to connect the board to the slip-resistant splined adapter (sold separately).
Features:
- Measure approximately 9 1/8" long
- Sold in pairs
- Does not include male mount ends
- Chrome
Special Order: 2-4 weeks delivery
Fitment Notes:
- Driver applications require model-specific Splined Adapters (sold separately)
- Passenger applications for Harley-Davidson Softail & Dyna require Anti-Rotation Mounts. Installation on other models in place of a male mount footpeg require Splined Adapters (Part # 8883)
- Passenger applications utilizing Part # 7916 requires 1" clearance from bottom of footpeg mount and exhaust. Sits 1" farther out than stock.
- Part # 4455 bracket design elevates board above existing peg locations about 1-1/4".
- Boards should not be installed in place of a footpeg on a peg mount secured with a single fastener and no anti-rotation mechanism. The board will apply too much force and loosen the mount from the bike.
- Verify operation of existing shift lever and brake pedal will not be adversely affected by installation.
Install footboards in place of a footpeg! These kits include our finely chromed ISO-Boards and a cast bracket to connect the board to the slip-resistant splined adapter (sold separately).
Features:
- Measure approximately 9 1/8" long
- Sold in pairs
- Does not include male mount ends
- Chrome
