Dynojet ATV/UTV Power Commander FC

Please Note

• This unit does not work with any of the Dynojet accessories - SFM, Ignition Module, shifter, LCD.
  

The Power Commander FC is a new plug-n-play fuel management device pre-programmed with Make/ Model specific maps. In addition the Power Commander FC has the added ability to modify or change these maps on the fly without a computer.

Users can literally select between a Power Commander FC Map, custom-built maps, or even fine tune low, mid or high rpm ranges while sitting on the bike and without plugging into a computer. Standard +/- 10% increments from selected map settings, different ranges are available using the supplied Control Center software.

Users can also load up to 10 of their personally built Power Maps into the Power Commander FC and select between them while in the saddle - eliminating the need to "re-boot" with the computer every time a new map is desired.

Features

• Uses OEM style connectors and high quality wiring harnesses
• Small, lightweight and easy-to-fit on the bike
• Pre-programmed with PCFC Power Maps specific to make, model
• No computer necessary for modifying fuel management
• Fully adjustable computer compatibility for ultimate tuning and personalization
• Software is compatible with Power Commander, so you can download Power Commander maps to the PCFC
• Integrated O2 Optimizer where Applicable - WHERE APPLICABLE
• +250 / -100 fuel change. Enough adjustment to cover almost all modifications
• Enhanced “accel pump” utility (increased adjustment and sensitivity ranges). When you need to adjust your fuel curve for quick throttle inputs.

Please Note

• Not compatible with Drive By Wire throttle
• This unit does NOT work with any of the Dynojet accessories - SFM, Ignition Module, shifter, LCD.

Take charge of your Can-Am's fuel curve with the Power Commander FC, a plug-and-play fuel management device that comes pre-programmed with maps specific to your model. You're able to modify or change these maps without the use of a computer.

Inexpensive yet very precise way to control your fuel curve.

The Power Commander FC is a new plug-n-play fuel management device pre-programmed with Make/ Model specific maps. In addition the Power Commander FC has the added ability to modify or change these maps on the fly without a computer.

Users can literally select between a Power Commander FC Map, custom-built maps, or even fine tune low, mid or high rpm ranges while sitting on the bike and without plugging into a computer. Standard +/- 10% increments from selected map settings, different ranges are available using the supplied Control Center software.

Users can also load up to 10 of their personally built Power Maps into the Power Commander FC and select between them while in the saddle - eliminating the need to "re-boot" with the computer every time a new map is desired.

Features

• Uses OEM style connectors and high quality wiring harnesses
• Small, lightweight and easy-to-fit on the bike
• Pre-programmed with PCFC Power Maps specific to make, model
• No computer necessary for modifying fuel management
• Fully adjustable computer compatibility for ultimate tuning and personalization
• Software is compatible with Power Commander, so you can download Power Commander maps to the PCFC
• Integrated O2 Optimizer where Applicable
• +250 / -100 fuel change. Enough adjustment to cover almost all modifications
• Enhanced "accel pump" utility (increased adjustment and sensitivity ranges). When you need to adjust your fuel curve for quick throttle inputs.

PIGGYBACK FUEL TUNER
Monitor and maintain your ATV's air/fuel ratio without directly changing the ECU with our Power Commander line of EFI tuners. This device has tons of tunes to choose from and can optimize your ATV for speed, torque and power.

UPGRADABLE POWER
The Power Commander EFI tuner line can help take your ATV to the next level of power, without the issue of rewriting the ECU directly. With hundreds of tunes to choose from perfectly tailored for stock, modified or racing ATVs, this device is an absolute necessity during the upgrading process