Depuis 2008
Prix bas garanti
Retour facile
Expédition rapide
Détails du produit
Pro Series studs are intended for use with Pro Series backers and do not come packaged with nuts
Fitment Note:
- Designed for the Ski-Doo XP and Camso single ply tracks.
This stud will offer more support for the trail rider that is running fewer studs than recommended on either the single ply tracks or the 3 ply tracks. It features 60° carbide tip for aggressive penetration, and chamfered head design to reduce vibration and idler wheel wear. Use with “Power Plate + Plus“ Backer Plates for all five (5) available lengths. (Power Tower Lock-Nut recommended for 1.375”, 1.500" & 1.625")
Features:
- 5/16”-24 threads
- Lightweight and durable design
- 1.080" to 1.187" studs include Standard lock-nuts unless noted otherwise
- 1.375" and 1.500" studs are packaged with .500" Power Tower locknuts unless noted otherwise
- 1.625" and taller studs are packaged with .750" Power Tower locknuts unless noted otherwise
Fitment Note:
- Designed for the Ski-Doo XP and Camso single ply tracks.
This stud will offer more support for the trail rider that is running fewer studs than recommended on either the single ply tracks or the 3 ply tracks. It features 60° carbide tip for aggressive penetration, and chamfered head design to reduce vibration and idler wheel wear. Use with “Power Plate + Plus“ Backer Plates for all five (5) available lengths. (Power Tower Lock-Nut recommended for 1.375”, 1.500" & 1.625")
Features:
- 5/16”-24 threads
- Lightweight and durable design
- 1.080" to 1.187" studs include Standard lock-nuts unles noted otherwise
Fitment Note:
- Designed for the Ski-Doo XP and Camso single ply tracks.
This stud will offer more support for the trail rider that is running fewer studs than recommended on either the single ply tracks or the 3 ply tracks. It features 60° carbide tip for aggressive penetration, and chamfered head design to reduce vibration and idler wheel wear. Use with “Power Plate + Plus“ Backer Plates for all five (5) available lengths. (Power Tower Lock-Nut recommended for 1.375”, 1.500" & 1.625")
Features:
- 5/16”-24 threads
- Lightweight and durable design
- 1.375" and 1.500" studs are packaged with .500" Power Tower locknuts unless noted otherwise
Fitment Note:
- Designed for the Ski-Doo XP and Camso single ply tracks.
This stud will offer more support for the trail rider that is running fewer studs than recommended on either the single ply tracks or the 3 ply tracks. It features 60° carbide tip for aggressive penetration, and chamfered head design to reduce vibration and idler wheel wear. Use with “Power Plate + Plus“ Backer Plates for all five (5) available lengths. (Power Tower Lock-Nut recommended for 1.375”, 1.500" & 1.625")
Features:
- 5/16”-24 threads
- Lightweight and durable design
- 1.625" and taller studs are packaged with .750" Power Tower locknuts unless noted otherwise
Pro Series studs are intended for use with Pro Series backers and do not come packaged with nuts
Fitment Note:
- Designed for the Ski-Doo XP and Camso single ply tracks.
This stud will offer more support for the trail rider that is running fewer studs than recommended on either the single ply tracks or the 3 ply tracks. It features 60° carbide tip for aggressive penetration, and chamfered head design to reduce vibration and idler wheel wear. Use with “Power Plate + Plus“ Backer Plates for all five (5) available lengths. (Power Tower Lock-Nut recommended for 1.375”, 1.500" & 1.625")
Features:
- 5/16”-24 threads
- Lightweight and durable design
