Goujons Woody's Grand Master Pro Carbide

Features:

• The Grand Master Pro snowmobile stud with a 60 deg. carbide tip in a steel shank makes an aggressive profile to easily penetrate hard pack and ice.
• Grand Master Pro has 60 deg. carbide insert.
• A 1.2 in. head makes a larger anchor to distribute pressure over a wider area on the single ply track.
• This is the same stud as BRPs Phantom Sharp Stud.
• This stud cannot be used in a traditional 2 ply track.
• The 2.52 pitch single ply track cannot accommodate the Round Grand Digger support plate.
• Use the Square and Double Grand Digger support plates.
• 5/16" Shank with a 60 Degree carbide tip.
• Short Big Nuts (ALN2-4500) Included with 1.325" & 1.450" lengths.
• Tall Big Nuts (ALN2-7000) Included with 1.575" length.
• Support plates are sold separately.